LDC-F high-efficiency tube-filter dust collector series (tube-filter, dust collector, bag filter, environmental protection device ) is a kind of high-efficiency tube-filter dust collector developed specially for light-weighted hard dusty gas, based on the LCD and LDC-B tube-filter dust collectors ( dust collector, bag filter, environmental protection device )series. It has the following advantages:

  ·Vertical assembly structure is adopted for the tube-filter, which is totally different from the inclined-drawer structure of the LCD. The advantages are: ① limit floor area; ②25 ～ 30 ％ higher in impulse-blowing deashing rate than the LCD inclined-drawer structure, therefore an improvement of 25 ～ 30 ％ in the tube-filter usage efficiency within the same area unit.

  ·The dust collector has installed with cone-ash hopper, high-pressure gas and pressure reducing valve

  · By adopting Light weighted steel structure, the steel consumption is only 50-60% of the LDC model , therefore reduce the price and cost of the devices. In the mean time, the tube-filter dust collector light enough for installation on roof or on floors.

  · Side-inlet structure is adopted, which largely reduce the occupancy space for installation of the tube-filter dust collector

    LDC-F high-efficiency tube-filter dust collector series mainly suitable for the dedusting of light-weighted hard dusty gas in the industry of building material, light industry, metallurgy, chemical, machine work, hardware , electronic and pharmaceutical.

    The treated wind rate of LDC-F high-efficiency tube-filter dust collector (tube-filter, dust collector, bag filter, environmental protection device ) usually is smaller than 750 ～ 100000 m 3 /h .

· By adopting Light weighted steel structure, the steel consumption is only 50-60% of the LDC model , therefore reduce the price and cost of the devices. In the mean time, the tube-filter dust collector light enough for installation on roof or on floors.

    LDC-H upper-inlet high-efficiency tube-filter dust collector series ( dust collector, bag filter, environmental protection device ) mainly suitable for the dedusting of heavy-weighted hard dusty gas in the industry of building material, light industry, metallurgy, chemical, machine work, hardware , electronic and pharmaceutical.

    LDC- Q integrative equipments series of strong dust absorption and noise elimination ( dust collector, bag filter, environmental protection device ) is a kind of small-scale high-efficiency tube-filter dust collector developed specially for pointing-dedusting of dust and tiny mass (e.g. metal pieces, tiny impurity mass) adhered to the external or interior wall of equipments, based on the LDC and LDC-B tube-filter dust collectors ( dust collector, bag filter, environmental protection device )series. It has the following advantages:

  ·Special suction nozzle is installed in the dust collector, with brush or steel wire brush at the end of the nozzle. The nozzles are in forms of acutilingual, plagiostome and flat head.

  ·The dust collector is of strong suction that provide a negative pressure of over 3000Pa. As long as the dust or tiny mass being stirred by the brush or steel wire brush at the end of the nozzle, the dust will be sucked into the dust collector immediately. Therefore, due to point-dedusting of dust or tiny mass adhered to the external or interior wall of equipments, it will be very effective.

  · dust collector series ( dust collect device ) has a high configuration of devices, the self- configuration includes: exhaust fan, high-pressure gas bag, noise insulation box and lined elbow. Therefore, with only ① electrical source, ② high-pressure gas and ③butt joint with draft tube, the dust collector can be put into operation immediately.

  · Light-weighted steel structure adopted, helps the tube-filter dust collector series ( dust collect device ) light enough for moving and installation.

  · Drawer-Hooper structure is adopted, which reduce the height of the tube-filter dust collector series ( dust collect device ), while in the meantime easy to used.

  · Upright-closet design with a neat outlook, combine with transparent closet operation and control system, Helps to upgrade the state-of-the-art of the image of the tube-filter dust collector.

  · Four flexible wheels are installed at the bottom of the tube-filter dust collector ( dust collect device ), while side arm installed on the side of the tube-filter dust collector. The side-inlet of the tube-filter dust collector has provided with plain flange. With the above configuration, the tube-filter can be move to any needed position or post.

    LDC- Q integrative equipments series of strong dust absorption and noise elimination ( dust collector, bag filter, environmental protection device ) mainly suitable in the industry of building material, light industry, metallurgy, chemical, machine work, hardware, electronic, plastic, paint-spraying and pharmaceutical. Especially suitable for pointing-dedusting in the interior wall of all kinds of grinding equipment. By using different suction nozzle, the dust adhere to the interior wall of the equipment can be cleaned off immediately.

    The treated wind rate of LDC- Q integrative equipments series of strong dust absorption and noise elimination ( dust collector, bag filter, environmental protection device ) usually is smaller than 3600 m 3 /h .